Contact: Cheng Huijiang
Cheng Huijiang: 13806256210
Address: Wujiang District, Suzhou City,
Jiangsu Province, Fenghai town Jin Jinba Road, 333
What is the basic overview of heat shrinkable sleeves?
Heat shrinkable fill sets of products is designed for buried and overhead steel pipe welds of the anti-corrosion and insulation pipe insulation design. It is composed of radiation cross-linked polyolefin substrate and special sealed hot melt compound, special sealed hot melt and polyolefin substrate, steel pipe surface and solid epoxy coating can form a good bond.
WK-WSS heat shrinkable fill sets in the heating installation, the substrate in the radial contraction at the same time, the internal composite layer melting, tightly wrapped in the mouth, together with the substrate in the pipe formed a solid Anti-corrosion, with excellent wear resistance, corrosion resistance, impact resistance and good anti-ultraviolet and light aging performance. In addition to the heat shrinkable fill sets in the industry known as the living sets, relative to the heat shrink sets of dead sets in terms of, in addition to the main body of heat shrinkable sleeve, but also with strips and fixed pieces, and heat shrinkable sleeve Large-scale production, construction is also a lot of convenience.
- high mechanical strength, strong anti-aging ability.
- Good environmental stress resistance.
- Excellent bonding performance.
- easy to use.
Implementation of the standard ": SY / T 0413-2002, NACE RP0303-2003
Maximum operating temperature: 80 ℃
Applicable outer anti-corrosion coating: PE, FBE, PP steel pipe
Preheating temperature: 75 ℃
Recommended rust level: Sa 2.5
Product Specifications: The product can be used for DN100-DN1000 all steel pipe
The thickness of the substrate is from 1.0 to 2.0 mm and the thickness of the adhesive layer is from 0.8 to 2.0 mm