Contact: Cheng Huiqiang
Address：No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province
一分彩Suzhou Qiangjiang Pipeline Anticorrosive Materials Co., Ltd. tells you
How to quickly and effectively remove the traces of anticorrosive tape?
Anticorrosive tape manufacturer Suzhou Qiangjiang Pipeline Anticorrosive Material Co., Ltd. tells you
Generally speaking, wipe the traces left by the anticorrosive tape and moisten it with water. If it doesn't work with water, wait for a while, the water penetrates into the remaining paper, and use the eraser to clean it up. Remove the traces of this tape, not too hard to erase. In fact, to remove the traces of anticorrosive tape, alcohol and gasoline are generally used. Without pure alcohol and gasoline, it is easier to buy disinfectant alcohol and gasoline.
一分彩Without pure alcohol and gasoline, alcohol and gasoline are readily available. Some things generally have these ingredients, and they can have similar effects. If the effect is not so good. However, care must be taken with solvents to see if they affect some surfaces. In addition, organic solvents have the function of dissolving many organic substances and can also assist management. The cleaning effect is obvious and cannot be vigorously erased.
Viscoelastic anticorrosive tape.png
一分彩Specific method: Dip a sufficient amount of 95% alcohol with a soft cloth or the like, then gently wipe the traces of the anticorrosive tape, and the traces will easily become soft and detached. However, sometimes it is found that alcohol is not very effective for some anticorrosive tapes. This can be done by using a soft cloth dipped in gasoline and rubbing the adhesive. At this time, it should be noted that gasoline must be used carefully because it has a "dissolving" effect. Either rub it in an unimportant place first, and use it if there is no problem; but be careful not to use too much gasoline and keep the time as short as possible.
一分彩If the tape traces of the anticorrosive tape are not completely removed, the appearance of the pipeline will be affected. Generally, the construction team will use the above methods to remove the traces of this anticorrosive tape and restore its appearance.
Contact: Cheng Huiqiang
|Contact : Li Cong|
|Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu|