Contact: Cheng Huiqiang
Address：No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province
Main points of anticorrosive adhesive tape during construction
一分彩According to Jining Xunda Pipeline Anticorrosive Company's construction method of forming anticorrosive adhesive tape in long-term and after-sales service with customers for more than 20 years, and according to national industry standard SY / T0414-98 for polyethylene adhesive tape and foreign standards AWWAC214 and related data of professional companies (POLYKEN in the United States and ALTA in Italy), the following construction methods are saved to save labor and materials: the prefabricated operation line of the adhesive tape holds the steel pipe in several pairs at a certain angle with the pipe Driving round.
一分彩The steel pipe moves forward while rotating, and is connected and disconnected by a quick joint. There are steel wire wheels for rust removal or shot blasting along the pipeline, primer coating, and tape winding device. The steel pipe will pass through the operation line to complete the entire tape winding anticorrosion construction. This method has a high degree of automation and good construction quality, and is suitable for large-scale engineering and anti-corrosion engineering of steel pipes with various pipe diameters. The steel pipe is manually wound with the adhesive tape, and the steel pipe is used to manually remove rust, and then the primer is manually applied. After the primer is dry, it is not sticky to the touch.
拿 Take the roll of tape with your hand, tighten it and pass it manually according to the overlap requirements, winding it round by turn. This method is suitable for anti-corrosion construction of small batches and multiple pipe diameters. Manually winding the steel pipe with adhesive tape to lift the steel pipe or on the pipeline site, remove the rust by hand wire brush, and apply primer. The manual winding machine is jacketed on a steel pipe, and after adjusting the rubber wheel to an appropriate angle, the tape is placed on the unwinding shaft, and the winding machine is manually wound around the winding. This method is suitable for on-site construction, especially for the non-stop transfer of anti-corrosion coatings in existing pipelines. The power tool winding method places the steel pipe on a rubber wheel that carries the steel pipe by a motor and a reduction gear. Anticorrosive tape
Start the motor of the transmission device to make the steel pipe rotate at a constant speed. Use an artificial steel wire brush to remove rust, roll the primer, and then place the tape on the unwinding roller or unwinding roller of the unwinding trolley, and slowly move forward according to the overlap requirements to wind it one by one. This method is suitable for precast or large-scale steel pipe anticorrosion projects in the workshop. Anticorrosive tape manufacturer
Suzhou Qianggu Pipeline Anticorrosive Material Co., Ltd. is located in Fenhu Economic Development Zone, Wujiang District, Suzhou City, Jiangsu Province. It is a comprehensive anticorrosive and waterproof material manufacturing industry with complete anticorrosion products, advanced equipment and stable quality. Anticorrosive products are:
一分彩Polyethylene pipe anticorrosive tape, polyethylene modified tape CTB-Y, polypropylene anticorrosive tape CTB-B, aluminum foil anticorrosive adhesive tape, radiation crosslinked polyethylene anticorrosive heat shrinkable sleeve, heat shrinkable tape, heat shrinkable winding tape, heat shrink Waterproof cap, viscoelastic anticorrosive tape, viscoelastic anticorrosive paste and many other anticorrosive materials. High temperature anticorrosive tape price
Contact: Cheng Huiqiang
|Contact : Li Cong|
|Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu|