一分彩

新闻

NEWS CENTER

NEWS CENTER

CONTACT US

Contact: Cheng Huiqiang

Cheng Huiqiang:13806256210

Telephone:0512-63982510


Contact:Li Cong

Mobile phone:13962536717

Fax:0512-63982520

Address:No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province

Website:www.diendanthanhly.net

Selection of polypropylene anticorrosive tape

Your current location: Home >> News >> Company news

Selection of polypropylene anticorrosive tape

Release date:2017-09-30 Author: Click:

一分彩Selection of polypropylene anticorrosive tape

一分彩Since the function of the polyethylene adhesive tape is to firmly and durablely attach a specific ceramic tile to a given base layer, the selection of the polyethylene adhesive tape must also depend on the combination of the two bonded materials, and The type of load the bonding system is subjected to in its specific service environment. Fortunately, the 19 models of ceramic tile polyethylene adhesive tapes in China's current JC / T547-2005 (ie, International Standards ISO13007: 2004 Part 1, 2) consolidate the world's counterparts in these decades of exchanges Consensus of countermeasures of intricate combination conditions. For example, the lateral deformation capabilities S1, S2 of cement-based polyethylene adhesive tapes have been proven to be effective performances against cyclic loads and impact forces.

一分彩The good polyethylene adhesive tape in principle is the thinner the more effective, so the thickness of the ceramic tile polyethylene adhesive tape in the application actually depends on the flatness of the base layer and the ceramic tile, and the size of the ceramic tile. It is generally required that the flatness of the base layer is measured with a 2? M ruler and the tolerance does not exceed 3? Mm; the thickness of the ceramic tile should also be within 10%. In this way, the thickness of the polyethylene adhesive tape can generally be between 2 and 6 mm. For example, a 2? Mm thick polyethylene adhesive tape is sufficient to stick a 50? Mm? X? 50? Mm mosaic. However, if AI-type fine extruded ceramic tiles are taken as an example, the allowable manufacturing deviation of the surface flatness in the national standard is 0.8%. Then, a 800? Mm? X? 800? Mm tile is allowed to deviate from the reference plane by 9? Mm, so the thickness of the polyethylene tape designed for 10? Mm is not conservative at all.

Selection of polyethylene adhesive tape

Since the function of the polyethylene adhesive tape is to firmly and durablely attach a specific ceramic tile to a given base layer, the selection of the polyethylene adhesive tape must also depend on the combination of the two bonded materials, and The type of load the bonding system is subjected to in its specific service environment. Fortunately, the 19 models of ceramic tile polyethylene adhesive tapes in China's current JC / T547-2005 (ie, International Standards ISO13007: 2004 Part 1, 2) consolidate the world's counterparts in these decades of exchanges Consensus of countermeasures of intricate combination conditions. For example, the lateral deformation capabilities S1, S2 of cement-based polyethylene adhesive tapes have been proven to be effective performances against cyclic loads and impact forces.

选择 Typical selection of polyethylene adhesive tape in combined working conditions

一分彩Combination conditions polyethylene tape? Typical grade

一分彩铺设 Laying medium and high water-absorption 炻 ceramic tiles C1 on indoor rigid (such as reinforced concrete) floors

一分彩铺设 Laying of medium and high water-absorbing terracotta C1T on indoor rigid (such as reinforced concrete) walls

铺设 Lay ceramic tile C2 with low water absorption on the old ceramic tile surface in the office

铺设 Laying ceramic tiles C2 in a long-term soaking environment

铺设 C2TE ceramic tile on outdoor reinforced concrete wall

一分彩铺设 Laying ceramic tiles C2S1 in places with strong external vibration such as subway stations and elevator rooms

快速 Quickly renovate large-scale ceramic tile floor C2F in the mall lobby and airport restaurant

铺设 Laying ceramic tiles D2T ?, C2TS1 on indoor lightweight partition boards

铺设 Laying pool brick R2T on stainless steel swimming pool

一分彩The good polyethylene adhesive tape in principle is the thinner the more effective, so the thickness of the ceramic tile polyethylene adhesive tape in the application actually depends on the flatness of the base layer and the ceramic tile, and the size of the ceramic tile. It is generally required that the flatness of the base layer is measured with a 2? M ruler and the tolerance does not exceed 3? Mm; the thickness of the ceramic tile should also be within 10%. In this way, the thickness of the polyethylene adhesive tape can generally be between 2 and 6 mm. For example, a 2? Mm thick polyethylene adhesive tape is sufficient to stick a 50? Mm? X? 50? Mm mosaic. However, if AI-type fine extruded ceramic tiles are taken as an example, the allowable manufacturing deviation of the surface flatness in the national standard is 0.8%. Then, a 800? Mm? X? 800? Mm tile is allowed to deviate from the reference plane by 9? Mm, so the thickness of the polyethylene tape designed for 10? Mm is not conservative at all. Suzhou Qiangjiang Pipeline Anticorrosive Material Co., Ltd.


Recently viewed:

Suzhou Qiangjiang Pipeline Anticorrosive Material Co., Ltd.

Contact: Cheng Huiqiang

Contact : Li Cong
Telephone:0512-63982510 Mobile phone:13962536717

Mobile phone:13806256210

Fax:0512-63982520
Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu
Website:www.diendanthanhly.net

Scan