Contact: Cheng Huiqiang
Address：No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province
一分彩Product description and use:
一分彩Epoxy coal asphalt cold-wound tape is composed of two parts: base tape and setting rubber. The base tape is impregnated with an epoxy coal tar pitch adhesive made of polypropylene non-woven felt, and then cut, rolled and deoiled. It is divided into GH401 reinforced grade (0.4mm), GH402 extra reinforced grade (0.6mm) and GH403 according to thickness. There are three types of thickening (0.8mm), which can be slit according to user requirements. The styling adhesive is composed of component A and B, which are divided into normal temperature type (used above 0 ℃), low temperature type (used at 0 ℃ -8 ℃) and ultra-low temperature type (-5 ℃ --25) ℃ use) three. Epoxy coal tar cold-wound tape is supplied with base tape and styling rubber when it leaves the factory. The styling rubber A and B components are mixed in equal amount during construction, and then wrapped around the surface of the steel pipe according to the structure of styling / base tape / styling rubber. After standing and curing naturally An epoxy coal tar pitch anticorrosive layer is formed. Applicable to the anticorrosion of buried and underwater steel pipelines, natural gas, tap water, and heating pipes. It is also suitable for waterproofing concrete structures such as steel tank bottoms and sewage tanks, roof waterproofing layers, toilets, bathrooms, and basements. And prevent leakage.
一分彩1. Epoxy coal asphalt cold-wound tape is a solvent-free environmental protection product, that is, the base tape and styling adhesive do not contain any volatile solvents, which is safe, fireproof and effectively protects the environment and the health of construction workers.
2. The cold-wound tape substrate is made of polypropylene non-woven felt. This material is a new type of synthetic fiber with high mechanical strength and good corrosion resistance. The surface does not contain wax and has a uniform thickness. Therefore, the surface of the anti-corrosion layer is flat, tightly bonded, and needle-like. Fewer holes, excellent electrical and corrosion resistance.
一分彩3, styling adhesive is a solvent-free quick-drying formula, the anticorrosive layer cures fast, and is divided into two types according to the seasons: normal temperature, low temperature and ultra low temperature, so it can be used throughout the year, alleviating the winter construction problems.
4. Convenient and fast construction. One winding can reach the required thickness and electric spark leakage detection voltage of the reinforced or extra-strength anticorrosive layer required by China Petroleum and Natural Gas Industry Standard SY / T 0447-96, which is higher than the original use of epoxy coal The same anticorrosive layer composed of asphalt paint and glass cloth saves labor, convenience and speed.
5. Cold-wound epoxy coal tar pitch makes the construction of epoxy coal tar pitch anticorrosive layer into factory pre-processing, which effectively improves the quality and speed of construction, for this type of low price, long life and excellent anticorrosive performance
Contact: Cheng Huiqiang
|Contact : Li Cong|
|Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu|