Part of a product and enterprise logo ( Anticorrosive tape price )
Product Name: Primer
Product uses: Anticorrosive tape Supporting products (increase the bonding strength between anticorrosive surface and adhesive tape)
Company name: Shandong National Plastic Co., Ltd.
Site: Shengli Tuo four joint station, Shengli oil field, Shengli Oilfield, Dongying, Shandong
Emergency call: 0546-8741309
Second part composition / composition information
Petroleum resin, rosin resin, SBS, natural rubber germ, ethyl acetate, solvent oil and so on.
The third part is dangerous signs.
Category 2 of flammable liquids, severe eye injury / eye irritation category 2A, specific target organ toxicity - single exposure category 3 (narcotic effect).
Signal word: danger
Danger note: high speed flammable liquids and steam cause severe eye irritation, which may cause drowsiness or dizziness.
Emergency: This product is not dangerous under normal installation condition, but it will release toxic by-products when overheating or burning.
Fourth part first aid measures
Inhalation: if inhaled, please move the patient to fresh air. If you stop kneecap, give artificial respiration. Seek medical advice.
Skin contact: rinse with soapy water and plenty of water. Seek medical advice.
Eye contact: rinse thoroughly with plenty of water for at least 15 minutes. Seek medical advice.
Ingestion: do not feed your intuitioner anything from your mouth. Rinse your mouth with water. Seek medical advice.
The fifth part is fire control measures.
Suitable extinguishing medium: foam, dry powder and carbon dioxide. Spray or mist - only for fires.
The specific risk of chemicals: liquid and steam are highly flammable. Exposure to heat, exposure to open flames or oxidants is a serious risk of fire. Steam may drift far away from the source of fire. Heating may cause expansion or decomposition, resulting in rapid rupture of containers. Burning may produce toxic carbon monoxide (CO) fumes.
Special protective behavior of firefighters: it may be intense or explosive. Wear breathing apparatus and protective gloves. Take all possible measures to prevent spills from entering the sewers or waterways. If safety is ensured, turn off electrical appliances until gas fire hazards are removed. Water spray is used to control the fire and cool the adjacent area. Avoid direct spraying into the liquid tank. Keep away from hot containers. Spray water from a protected location to cool containers exposed to fire. If this is safe, remove the container from the fire.
The sixth part is leakage emergency handling.
Use sand, earth or vermiculite to absorb leaks, and remove spades and explosion-proof equipment without sparks.
The seventh part is operation, disposal and storage.
Operation and disposal: refer to the installation instructions of this product. Operators need to wear suitable anti-corrosion equipment. Food, smoking and smoking are prohibited in construction, storage and production areas. The operator must wash his hands and face before eating and smoking. Avoid contact with molten materials.
Storage: store in a well ventilated area, keep low temperature, keep the container closed, and store must be locked.
The eighth part is contact control / personal protection.
Engineering control: provide good natural ventilation conditions.
Respiratory system protection: good ventilation without protection. A dust mask (full mask) must be worn when it is possible to contact its dust. When it is exposed to its vapour, it should wear a filter mask.
Eye protection: protection has been made in respiratory system protection.
Hand protection: wear protective gloves.
Body protection: protective clothing.
Other protection: after work, shower and dressing.
The ninth part is physical and chemical properties.
Physical state: liquid.
Smell and appearance: smell of acetic acid.
Color: brown black.
Flash point: < 19 C.
Solubility: insoluble in water.
The tenth part is stability and reactivity.
Stability: stable in normal condition.
Risk reaction possibility: no hazardous polymerization will occur.
Avoidable conditions: high temperature, heat source, ignition source and so on.
Incompatible material: strong oxidant.
Hazardous decomposition products: carbon oxides, other types of pyrolysis products produced by organic combustion.
The eleventh part is toxicological data.
Exposure routes: inhalation, oral, skin and spectacles.
Chronic or long-term toxic effects: prolonged or repeated skin contact may cause dry and cracked skin, which may lead to dermatitis.
The twelfth part is ecological information.
The thirteenth part is disposal.
Disposal methods: disposal of landfill sites approved by the government in accordance with local laws and regulations.
The fourteenth part is transportation information.
Avoid human contact, including inhalation, cover up, keep cool, and prohibit smoking, open fires, heat sources or ignition sources.
The fifteenth part is regulation information.
Relevant regulations: "Regulations on the management of dangerous goods transport" and "Regulations on the safety management of dangerous chemicals".
Relevant national standards: GB16483-2008, GB13690-2009, GB18218-2009, GB15258-2009, GB6944-2012, GB190-2009, GB191-2009, GB12268-2008, GA57-1993, GB/T15098-2008, GBZ2-2007