一分彩

新闻

NEWS CENTER

NEWS CENTER

CONTACT US

Contact: Cheng Huiqiang

Cheng Huiqiang:13806256210

Telephone:0512-63982510


Contact:Li Cong

Mobile phone:13962536717

Fax:0512-63982520

Address:No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province

Website:www.diendanthanhly.net

Heat shrinkable tube shrinkage

Your current location: Home >> News >> Industry news

Heat shrinkable tube shrinkage

Release date:2018-05-30 Author: Click:

Heat shrinkable tube shrinkage

一分彩Heat shrinkable tube shrinkage rate is also called heat shrinkage ratio and shrinkage ratio, which is the ratio of internal warp before shrinkage and internal warp after shrinkage. The common shrinkage rate of heat shrinkable tube is between double shrinkage and four times shrinkage. The shrinkage rates of heat shrinkable tubes are as follows: Conventionally, the heat shrinkage ratios of single wall heat shrinkable tubes are mostly 2: 1, 3: 1 and 4: 1; the shrinkage ratios of double wall heat shrinkable tubes are mainly concentrated in 3: 1 and 4: 1; medium-thick wall heat shrinkable tube shrinkage ratio of 3.5: 1 is more common; busbar heat shrinkable tube shrinkage ratio of 2: 1 and 2.5: 1 are more mainstream; as for special heat shrinkable tube according to process The use of materials, etc., has different changes in thermal shrinkage ratio, and the overall ratio is mainly 2: 1 shrinkage ratio. It is worth noting that the heat shrinkable tube has a division of 1.5 times shrinkage and 2.5 times shrinkage. What is the shrinkage rate of heat shrinkable tube at home and abroad? It is said that the heat shrinkage ratio of Tyco heat shrinkable tubes abroad can be 10: 1. The specific editor did not investigate and understand. The heat shrinkage ratio of domestic heat shrinkable tubes is basically locked at 8: 1. Remember A customer for 12 years, required to shrink the ultra-thin heat shrinkable tube φ6 to reach the φ1 size. The technical conditions at that time were fully realized, so the shrinkage ratio of domestic heat shrinkable tubes has reached a very high level . The shrinkage ratio of heat shrinkable tubes is different. In summary, the main 2: 1 to 4: 1 shrinkage ratio is still the mainstream. When purchasing heat-shrinkable tubes, the shrinkage rate can not be used as an important indicator, because it is basically the same, as for heat-shrinkable tubes that have more than ten times shrinkage, they are basically not used.


Recently viewed:

Suzhou Qiangjiang Pipeline Anticorrosive Material Co., Ltd.

Contact: Cheng Huiqiang

Contact : Li Cong
Telephone:0512-63982510 Mobile phone:13962536717

Mobile phone:13806256210

Fax:0512-63982520
Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu
Website:www.diendanthanhly.net

Scan