Contact: Cheng Huiqiang
Address：No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province
Brief Introduction of New Wanwan Anticorrosive Paste
一分彩Wannian anticorrosive paste (abbreviation: Wannian paste) is a patented product independently developed by our company. Is a two-component normal temperature
Vulcanized rubber viscous liquid, after curing, it is a medium-hard elastomer.
Technological advancement: the key technology of the product The rapid curing technology of liquid rubber at room temperature and suitable for the solid surface of most common substances
一分彩The bonding technology was independently created by our company.
一分彩Technical characteristics: The technical properties of vulcanized rubber are copied to the surface of most common substances, and can form with non-rubber substances
一分彩Technical innovation: Similar to the protection effect of anticorrosive hot-melt spray products () from a US company, but the difference is different
Technical route, and application below ℃, the protection effect is better than that of American products. The product has applied for a Chinese patent.
Applied fields: currently in special-shaped anticorrosion (valve wells, flanges, valves), storage tank edge plates, concrete foundations, pipelines
一分彩Brackets, sweat pipes, rusted bolts and nuts have been used.
Before curing, it is a viscous liquid, and the thickness of the coating is: It can penetrate into all the gaps of various material substrates; After curing, it forms a medium hard
Rubber elastomer with low temperature, not brittle at low temperature (℃) and no flowing at high temperature (℃).
After curing, the hardness reaches:, rubber elastomer, its cohesive strength is lower than the bonding strength, thereby ensuring that the bonding interface never peels off.
Compared with lower hardness viscoelastic paste (hardness) and viscoelastic tape (hardness), the hardness is greatly improved.
Therefore, it has better resistance to the impact of water currents, slamming waves, and resistance to wind and sand.
Except for painting on silicone and fluororesin materials, all materials (concrete, wood, various metals, epoxy coatings, polyethylene, poly
Acrylic, asphalt, glass, ceramic tile, exterior wall paint, rubber), under almost all conditions (humid, low temperature, high temperature, sweating, rust)
You can obtain satisfactory adhesion by brushing. The adhesion strength is greater than the cohesive strength of the material. Viscoelastic body
Wider application adaptability of plaster and viscoelastic tape.
This material has high chemical stability, in addition to having very good corrosion resistance, it also has good weather resistance, which is the same as the material.
High adhesive strength, low cohesive strength, rubber-based elastomer, non-perforated coating construction form, impact on the construction environment and the object of construction
Impeccable, high chemical stability, low water absorption, heat and cold resistance, absolutely no flowing during use, these characteristics can be combined in one
At present, there are only 10,000 sticks of antiseptic paste.
Contact: Cheng Huiqiang
|Contact : Li Cong|
|Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu|