Contact: Cheng Huiqiang
Address：No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province
The industrial industry pays more and more attention to anticorrosion issues, so it has a special anticorrosion product-anticorrosive tape. This product has good adhesion, so it is widely used in industrial pipeline anticorrosion, but sometimes it is used for anticorrosion. Repair, the correct repair will solve the problem, then how to use this product to repair the construction process?
1. For the anti-corrosion adhesive tape, the width of the edge of the anti-corrosion tape cannot meet the requirements, and anti-corrosive tape with a width of at least 95 mm should be used, and the tape should be spirally wound along the direction of the edge.
一分彩2. When the anti-corrosion pipe finds a defect, it should be marked and repaired in time.
一分彩Anticorrosive adhesive tape repairing construction technology
3. When repairing, repair the damaged part first, remove the loose burrs, clean it up and apply primer.
4. For a small range of pinhole-like defects, use the same anti-corrosive adhesive tape as the original anti-corrosion layer of the pipe body, and use the patch method to repair it. When repairing, cut a piece of 95 × 95 mm tape, cut out the rounded corners of the patch, and apply it to the wound after the primer is dry.
5. For the area where the large missing or anti-corrosion layer is damaged, so that the pipeline is exposed, the damaged anti-corrosion layer should be removed, the edges should be trimmed and smoothed, and then the adhesive tape of the appropriate width should be used to spiral the winding damage. region.
一分彩The above is the method for repairing pipes using anti-corrosion tapes described by the anti-corrosion tape manufacturer. The patch and primer should extend at least 45 mm in all directions of the defective area, and use wooden smooth tools to compact the anti-corrosion tightly. Adhesive tape so that it does not lift up. The correct patching method can accurately solve the problem, and it will not be repaired and worsened due to improper operation. However, you must pay more attention during daily operation to reduce damage to this product.
Contact: Cheng Huiqiang
|Contact : Li Cong|
|Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu|