1. According to the GB/T5210 method, the adhesion force of epoxy coating is tested to reach 6MPa and cohesive failure.
2. According to the GB/T5210 method, test the adhesion force of polyethylene coating to 5MPa, cohesive failure.
3, according to the GB/T5210 method to test the bonding force of concrete, reaching 2MPa, the concrete layer is pulled down.
The strong solid adhesive anticorrosive paste is a patented product developed by our company. It is divided into primer and surface coating. It is a two component vulcanized rubber vulcanized liquid at room temperature. It is a medium hard elastomer after vulcanization.
Advanced technology: the key technology of the product -- rapid vulcanization technology of liquid rubber at room temperature and the bonding technology applied to the surface of most common substances are created by our company.
Technological innovation: similar to the protective effect of an anticorrosive and hot melt spraying product (OXIFREE) of a company in the United States, it is a different technology route, and its protective effect is better than that of the US products under the application of 50 degrees Celsius. At present, the product has applied for Chinese patent.
Applied fields: it has been applied in special-shaped anticorrosion (valve well, flange, valve), oil tank edge plate, concrete base, pipe support, sweat pipe, corroded bolt nut and so on.
1. Product Overview: NTG-80 series viscoelastic body paste is our company's patented product. It is a kind of never hardening, heat-resistant and cold resistant water repellent paste material. It has many special functions such as filling seal, primer, underwater construction and so on. It is mainly used for anticorrosion of special-shaped pipe fittings, bolt anticorrosion, bottom coating with water construction, filling of flange gap, pipeline corrosion pit scraping, pipeline patching and smooth transition of sleeve sleeve and epoxy sleeve edge.
2. product features: 1. Never harden, keep the original shape, do not deform 80 degrees below the temperature. 2. The temperature range is wide, -45 C ~+80 C. Without coating primers, it can be directly bonded to 3PE, FBE, liquid epoxy coating, asphalt, PP and other coatings.Pure olefin polymers have the same chemical stability as polyethylene plastics, excellent corrosion resistance and reliability. The construction is simple and convenient, manual plastic does not stick to hands, pouring paste does not need to use hydraulic perfusion gun.It can carry water or underwater construction.