一分彩

一分彩产品

PRODUCT CENTER

NEWS CENTER

CONTACT US

Contact: Cheng Huiqiang

Cheng Huiqiang:13806256210

Telephone:0512-63982510


Contact:Li Cong

Mobile phone:13962536717

Fax:0512-63982520

Address:No. 333, Jinxian Road, Jinjiaba, FENHU Town, Wujiang District, Suzhou City, Jiangsu Province

Website:www.diendanthanhly.net

Photosensitive fiberglass

Your current location: Home >> Products >> Light curing material

Photosensitive fiberglass

Detailed introduction

Pipeline crossing dn610 290m 3PE pipeline

blob.png

blob.png

blob.png

Qiangguwan adhesive anti-corrosion paste is a patent product independently developed by our company, which is divided into base coating and surface coating. It is a kind of two-component normal temperature vulcanized rubber viscous liquid, which is medium hard elastomer after vulcanization.

The advanced technology: the key technology of the product -- the rapid vulcanization technology of liquid rubber at room temperature and the bonding technology applied to the surface of most common substances are created by our company.

Technological innovation: similar to the protection effect of oxifree, a corrosion-resistant hot-melt spraying product of a company in the United States, the protection effect is superior to that of the product in the United States when it is applied under 50 ℃. At present, the product has applied for Chinese patent.

Applied fields: at present, it has been applied in special-shaped anti-corrosion (valve well, flange, valve), oil tank edge plate, concrete base, pipe support, sweating pipe, rusty bolt and nut and other parts.

1. Product Overview: ntg-80 series viscoelastic paste is our patented product. It is a kind of paste material that will never harden, heat, cold and water resistant. It has many special functions such as filling and sealing, bottom coating, underwater construction, etc. It is mainly used for anti-corrosion of special-shaped pipe fitting, anti-corrosion of bolt, bottom coating with water, filling of flange gap, scraping of pipeline corrosion pit, pipe joint repair, smooth transition of pipeline sleeve and epoxy sleeve edge.

2. Product features: ⑴ never harden, keep the original shape, no deformation and no flow below 80 ℃. (2) wide temperature range, - 45 ℃ ~ + 80 ℃. (3) without primer, it can be directly bonded to 3PE, FBE, liquid epoxy coating, asphalt, PP and other coatings. (4) pure olefin polymer has the same chemical stability as polyethylene plastic, very good corrosion resistance and reliability. (5) the construction is simple and convenient, the hand is plastic and does not stick to the hand, and the filling paste does not need to use the hydraulic filling gun at any time. (6) it can carry water or underwater construction.

. is a product with high performance index and good comprehensive performance among all similar products.

2. It is the product with the largest thickness and the smoothest appearance available in all similar products. The protective layer formed has no high point and the strongest protection. This is understood by looking at the protective layer structure in the technical specifications provided by us.

3. It is a few products of the same kind that have no smell, are proved to be non-toxic, have no pollution to the construction environment, and have no harm to the construction personnel.

4. It is a product that can be constructed day and night in all similar products. Because of the need to avoid light during construction, tents should be used to block light during daytime construction. Because of the smell of other products, it is harmful to the construction personnel in the relatively closed tent, so we can only choose the construction without tent at night. But CND photosensitive glass fiber reinforced plastic prepreg has no smell and toxicity, so it is harmless to human body when it is constructed in closed tent, so it can be constructed day and night.



blob.png

Comparison conclusion:

1. As the application of pipeline protective layer, 2, 5, 7, 10, 12, 14, 15, 16, 17, 18, 19, 20 and 21 projects are 13 important and key projects (see SY / t6968 standard). More than half of the data of the light curing sleeve is missing, and the photosensitive FRP has complete data.

2. In comparison, the index of photosensitive FRP is higher than that of UV curing sheath, and the data of important index is several times higher than that of UV curing sheath (tensile strength is 4-7 times higher, bending strength is 3 times higher).

3. The UV curing sleeve has a pungent smell, which has obvious harm to the health of construction personnel. Photosensitive glass fiber reinforced plastic has no smell. It is tested by the authority department. It is a non-toxic and environmental protection product and conforms to the national environmental protection standard.

4. The thickness of photosensitive glass fiber reinforced plastic is obviously greater than that of light curing sleeve. As a protective layer, it is safer and guaranteed in quality.

Pipeline joint coating and anti-corrosion outer protective layer (China Resources Gas)

Anti corrosion outer protective layer of buried special-shaped parts (Sinopec)

Qiangguwan adhesive anti-corrosion paste is a patent product independently developed by our company, which is divided into base coating and surface coating. It is a kind of two-component normal temperature vulcanized rubber viscous liquid, which is medium hard elastomer after vulcanization.

The advanced technology: the key technology of the product -- the rapid vulcanization technology of liquid rubber at room temperature and the bonding technology applied to the surface of most common substances are created by our company.

Technological innovation: similar to the protection effect of oxifree, a corrosion-resistant hot-melt spraying product of a company in the United States, the protection effect is superior to that of the product in the United States when it is applied under 50 ℃. At present, the product has applied for Chinese patent.

Applied fields: at present, it has been applied in special-shaped anti-corrosion (valve well, flange, valve), oil tank edge plate, concrete base, pipe support, sweating pipe, rusty bolt and nut and other parts.

1. Product Overview: ntg-80 series viscoelastic paste is our patented product. It is a kind of paste material that will never harden, heat, cold and water resistant. It has many special functions such as filling and sealing, bottom coating, underwater construction, etc. It is mainly used for anti-corrosion of special-shaped pipe fitting, anti-corrosion of bolt, bottom coating with water, filling of flange gap, scraping of pipeline corrosion pit, pipe joint repair, smooth transition of pipeline sleeve and epoxy sleeve edge.

2. Product features: ⑴ never harden, keep the original shape, no deformation and no flow below 80 ℃. (2) wide temperature range, - 45 ℃ ~ + 80 ℃. (3) without primer, it can be directly bonded to 3PE, FBE, liquid epoxy coating, asphalt, PP and other coatings. (4) pure olefin polymer has the same chemical stability as polyethylene plastic, very good corrosion resistance and reliability. (5) the construction is simple and convenient, the hand is plastic and does not stick to the hand, and the filling paste does not need to use the hydraulic filling gun at any time. (6) it can carry water or underwater construction.

. is a product with high performance index and good comprehensive performance among all similar products.

2. It is the product with the largest thickness and the smoothest appearance available in all similar products. The protective layer formed has no high point and the strongest protection. This is understood by looking at the protective layer structure in the technical specifications provided by us.

3. It is a few products of the same kind that have no smell, are proved to be non-toxic, have no pollution to the construction environment, and have no harm to the construction personnel.

4. It is a product that can be constructed day and night in all similar products. Because of the need to avoid light during construction, tents should be used to block light during daytime construction. Because of the smell of other products, it is harmful to the construction personnel in the relatively closed tent, so we can only choose the construction without tent at night. But CND photosensitive glass fiber reinforced plastic prepreg has no smell and toxicity, so it is harmless to human body when it is constructed in closed tent, so it can be constructed day and night.

blob.png

blob.png

blob.png


Recently viewed:

Suzhou Qiangjiang Pipeline Anticorrosive Material Co., Ltd.

Contact: Cheng Huiqiang

Contact : Li Cong
Telephone:0512-63982510 Mobile phone:13962536717

Mobile phone:13806256210

Fax:0512-63982520
Address: No. 333, Jinxian Road, Jinjiaba, Wujiang District, Suzhou, Jiangsu
Website:www.diendanthanhly.net

Scan